How to Race Paper Boats With a Straw Without Tipping Them Over

By

·

To race paper boats with a straw, float two similar folded boats in separate lanes of a shallow tray, mark equal start and finish lines, and blow gently from behind each boat. Keep the straws above the water and away from the boats. Short, level puffs work better than blowing so hard that a boat tips or water splashes over its folds.

What you need for a paper boat race

  • Two pieces of similar-sized paper, folded into matching boats
  • A wide, shallow tray or a sink containing a few centimeters of still water
  • Two separate, clean drinking straws (one for each player)
  • Removable tape or paper markers for the start and finish positions
  • A towel and a timer, if you want to compare several races

Choose ordinary paper for a short, indoor experiment. Heavy cardstock can be difficult to fold, and wet paper eventually absorbs water and softens. Keep a towel under the tray, and supervise children around any water. A shallow container is enough; a bathtub, deep pool or open water is unnecessary.

Step 1: Fold two boats of the same size

Use identical paper sizes and the same folding method so one boat does not begin with an advantage. Sharpen the main creases with your fingertips, open the base gently, and check that both boats sit upright on a dry tabletop. If you need the folding instructions, follow our easy paper boat tutorial first.

Step 2: Make a fair starting line

Fill the tray just enough for both boats to float freely without scraping its bottom. Let ripples settle. Mark the start and finish positions on the outside edge rather than putting loose tape in the water. If the tray is narrow, race one boat at a time over the same distance. In a wider tray, use two lanes and place the bow of each boat at the same start line.

Two origami paper boats lined up for a fair water raceA shallow tray of calm water with a start line on the left, finish line on the right and two separate lanes, each with one small paper boat at the same starting position.Set up equal lanes and one start lineSTARTFINISH
Top view: two equally sized paper boats, separate lanes, a shared start line and the same finish distance.

Step 3: Blow across the water from behind

Each player uses their own straw. Hold its end a short distance behind the boat and above the water, pointing toward the folded paper, not down into the tray. Give a gentle, brief puff. Wait to see whether the boat moves straight before using another puff. Do not poke the hull with the straw, and do not dip or suck water through it.

Directing air mostly horizontally helps push the boat forward. A strong downward blast can disturb the water, fill the boat or push one edge under. If a player has trouble using a straw, fan air gently with a piece of card instead and compare the results as a separate challenge.

Blow gently through a straw behind the paper boatSide view shows a straw behind the origami boat, blue airflow arrows moving from the straw toward the folded sail, with the boat floating on flat water and no straw touching it.Aim across the water; keep the straw dryGENTLE AIRPAPER BOATKeep the straw above the water and behind the boat; never touch it
Side view: blow gently toward the paper boat from behind; the straw stays above the water and does not contact the boat.

Step 4: Decide how the winner is measured

Choose your rule before beginning. For a side-by-side race, the first boat whose bow crosses the finish line wins. For turn-taking races, time how long each boat takes to cover the same distance. If a boat turns sideways, allow each player the same number of corrective puffs or simply start a fresh round. Keep the starting water equally calm for both turns.

Why a paper boat spins, stops or tips

  • It turns sideways: the puff is hitting one side. Recenter the straw behind the boat and aim along its middle.
  • It tips: the puff is too forceful or pointed downward. Use shorter, gentler puffs and make sure the bottom is opened evenly.
  • It will not move: the air may be missing the folded sail, or the bottom may be touching the tray. Reposition it and check the water depth.
  • It gets soggy: paper absorbs water over time. Start with dry boats for each fair race, or explore ways to help a paper boat float longer as a separate experiment.
  • It leans before racing: rebalance the folds and see our guide on keeping a paper boat upright.

Three small experiments to try after the race

Change the puff length: keep the same boat and distance but compare one short puff with two short puffs. Change the boat’s orientation: observe whether air hitting the broad side or narrow bow changes its path. Change the paper: test two equally sized sheets with different thicknesses, keeping folds and puff strength as similar as possible. Alter only one variable per round; otherwise the results are difficult to interpret.

Record each trial in a simple table with columns for boat type, number of puffs, finishing time and whether it tipped. This turns a craft race into a repeatable experiment about moving air, resistance, balance and how paper reacts to water. It is not a precise physics measurement, because every puff and fold will vary.

Frequently asked questions

Can I race paper boats without straws? Yes. Small hand fans or folded cards can provide a breeze. Give both players the same fan and distance for a fairer test.

Should I seal my paper boats with tape? It is not necessary for a quick race. Waterproof coatings or tape can change weight and shape, so use identical treatments if comparing boats.

Is it okay for younger children? With close adult supervision, a shallow water tray and age-appropriate materials. Keep small objects out of reach of children who might put them in their mouths; never leave a child unsupervised around water.

What matters more, boat shape or blowing harder? Both matter, but harder is not automatically better. Symmetrical folds and controlled airflow can keep a boat moving straight without taking on water.

Add comment

Leave a Reply