How Can a Telescope Use a Liquid Mirror?

By

·

A reflective liquid rotating about a vertical axis can form a paraboloid, a curved surface that focuses parallel light. The International Liquid Mirror Telescope uses mercury rather than a polished glass primary mirror.

Mercury mirror beneath a transparent Mylar cover.
The covered ILMT mirror. The 4 m International Liquid Mirror Telescope: Construction, operation, and science, Figure 3, © J. Surdej et al. 2025; CC BY 4.0. Display reduced, uncropped.

The telescope points straight up. Instead of steering after stars, its detector electronically shifts charge to follow their drifting images. An air bearing supports smooth rotation; a transparent Mylar cover suppresses air-driven ripples.

A 1997 laboratory study tested a smaller liquid mirror under disturbances. Thinner mercury layers generally reduced scattered light from ripples, but defects in the supporting container became more visible through them. Some measured aberrations came from the testing optics, not the liquid surface. Optical quality depended on the whole carefully aligned system.

Telescope framework and optical corrector viewed from below.
ILMT framework and optical corrector. Figure 8, © J. Surdej et al. 2025; CC BY 4.0. Display reduced, uncropped.

Mercury requires professional containment, not a home experiment. Atmospheric turbulence still matters: see why stars twinkle.

Add comment

Leave a Reply