Wet paper can bend, then flatten or retain a curve after drying. Moisture differences across a sheet and lasting changes within its fiber network explain different parts of that story.

One face swells before the other
In 2011 experiments by Etienne Reyssat and L. Mahadevan, thin tracing paper placed on a water bath rapidly rolled up. Water entered from below, so the wetted side expanded before the upper layers. That mismatch bent the sheet rather than simply making it uniformly larger.
As water penetrated farther through the thickness, the difference diminished. Sheets that had not closed into a cylinder could uncurl and flatten while still wet. Longer sheets could remain rolled because surface tension held contacting layers together. The experiment therefore does not promise that every soaked sheet will straighten, but it shows how a changing moisture profile can first create and then relax curvature.
A network, not a stack of independent strips
The fibers are connected to one another, so their individual swelling cannot be treated as a collection of unrelated movements. A 2020 model by August Brandberg and colleagues explicitly represented bonded and free portions of fibers, including their different expansion along and across their lengths.
The calculations showed that even the smaller lengthwise expansion could matter substantially to the sheet. They also produced curling from a moisture gradient in an otherwise structurally uniform network, without requiring permanent material deformation or an existing stress difference through the thickness.
That is a useful distinction: a sheet can bend temporarily without first acquiring permanent damage. A successful model demonstrates a sufficient mechanism under its assumptions, not the absence of other mechanisms in every manufactured paper.

Why a dry sheet can remember the bend
A 2024 study by Alexander Maaß and colleagues tested permanent curl after one-sided wetting and drying. They made papers whose fiber-to-fiber bonds were chemically crosslinked to resist opening in water. These treatments greatly reduced the final curl, but did not reliably reduce the initial wet curl.
Their results support a role for partial opening and rearrangement of fiber bonds in the lasting deformation. A strong initial bend did not necessarily predict a strong permanent one. These were specially prepared laboratory papers, not a treatment recipe for damaged books.
Our paper-grain guide explains directional tests on expendable scraps. Keep those tests separate from conservation: do not wet a valuable document to investigate why it has curled. Its manufacturing and moisture history may matter as much as its present appearance.

Leave a Reply