Why Do Fences and Photos Show Moving Wavy Patterns? Moiré Explained

By

·

Walk past two overlapping fences and you may see broad stripes drift across them, even though both fences are perfectly still. Photograph a finely patterned shirt and another version of the puzzle can appear: wavy bands or colors that were not obvious on the fabric itself.

These are moiré patterns. The important clue is repetition. When one regular pattern is viewed together with another, their small differences can create a much larger pattern. To understand the effect, separate the fine lines that physically exist from the broad bands produced by their combination.

Overlapping enclosure mesh with broad dark and light moiré bands across fine wires, branches, and an animal inside.
Moiré bands across an enclosure at San Francisco Zoo. The broad bands differ from the fine mesh itself. Photo: Brocken Inaglory, CC BY-SA 3.0. Unmodified.

Two grids make a third pattern

Imagine looking through two layers of screen. In some places the dark wires line up, leaving relatively open gaps. Elsewhere, a wire in the front layer covers a gap in the back layer, blocking more light. Technorama’s explanation describes how these alternating arrangements produce the light and dark bands.

No broad stripe needs to be painted on either screen. It exists in the combined view. Move your head and the alignment along your sightline changes, so the stripe can appear to slide while the metal stays put.

This is a useful distinction from simply seeing a crooked wire. A bent wire belongs to one physical layer. A moiré band depends on the relationship between repeating layers, so a slight change in viewpoint can transform the entire pattern.

Why a tiny movement makes such a big change

The University of Arizona’s optics outreach guide describes moiré as a way of magnifying differences between patterns. Similar grids need only a small rotation or a difference in spacing to create much broader bands. Changing their alignment changes how often the lines come back into step.

Think of two rows of marks with slightly different spacing. One pair lines up, the next pairs gradually drift apart, and farther along another pair lines up again. The large-scale rhythm belongs to the repeated matching and mismatching, not to a new set of thick marks.

Six photographic panels showing moiré effects in overlapping perforated panels and metal mesh.
A photographic collection of moiré examples found in Rotterdam, including mesh and perforated panels. Photo: P K, CC BY 2.0. Unmodified.

A camera can supply the second grid

You do not always need two fences. Nikon’s explanation of moiré and false color identifies the camera sensor’s regular sampling pattern as another participant. Fine fabric or repetitive architectural detail can interact with it, producing stripes that belong to the photograph rather than to the object. Color-processing effects can also introduce false colors.

If a pattern appears in your picture but not in a direct view, try a modest change in camera angle or distance and take another frame. Compare them at the same viewing size. Nikon recommends checking photographs at full magnification rather than trusting a small camera preview. A changed pattern does not necessarily mean the fabric, screen, or camera is damaged.

Try the geometry with two combs

Technorama suggests holding two matching pocket combs one behind the other, roughly a finger-width apart. Use the evenly spaced section of the teeth and look through them against a plain, bright background. Slide one gently sideways, then rotate it a little. Watch for broader bands that change far more dramatically than the individual teeth.

Keep the combs away from your eyes and use ordinary room light, not direct sunlight. First observe with your eyes, then with a camera. That comparison helps separate a pattern already present in the overlapping combs from one the camera may add.

The word “interference” is often used here, but this screen-and-comb demonstration can be explained by alignment and blocked light. It should not be confused with the wavelength-scale diffraction behind a CD’s rainbow colors. The best first question is simpler: what are the two repeating patterns in this particular view?

Response

  1. […] moiré bands, this effect deliberately routes images through […]

Add comment

Leave a Reply