Why Does Sandpaper Stop Cutting?

By

·

Abrasives can lose their cutting action through clogging as well as wear.

Three used pieces of sandpaper.
Used sandpaper, not experimental specimens. Auckland Museum, 2015.34.36, CC BY 4.0; unchanged.

In 2022 MDF experiments, adhesive-bearing fibers accumulated between abrasive grains. Belts often gained mass despite grain damage. Microscopy also revealed grains breaking or pulling out: blockage and wear were distinct contributors to failure.

A 2021 experimental analysis compared four woods and three sanding directions. Identical belt specifications did not produce identical working lives. Its results depended on wood, direction and pressure, rather than grit number alone; the laboratory settings were not universal recommendations.

Microscope images of new and worn abrasive grains.
Grain wear, not a clogging map. Figure 6: ©2022 Yao Du, Xinmiao Sun, Bin Luo, Li Li and Hongguang Liu, CC BY 4.0; unchanged.

Compare what grit numbers measure.

Response

  1. […] Compare how abrasives lose their cutting action. […]

Add comment

Leave a Reply