Why Does a Seismometer Push Back Against Its Moving Mass?

By

·

A seismometer can measure shaking by resisting it, rather than letting its suspended mass swing freely.

Three assembled seismic sensors above a metal base.
The 2023 instrument. Germenis et al., Figure 4, CC BY 4.0; unchanged.

In a 2005 experiment, a capacitive sensor detected an inverted pendulum’s displacement relative to its frame. Electromagnetic feedback opposed that displacement. The control signal helped recover ground motion while limiting the mass’s movement. Temperature changes and ground tilt still complicated long-period measurements.

A 2023 design instead used a linearly suspended mass. Its electronics integrated an acceleration signal to obtain velocity. Comparing nearby instruments helped distinguish shared ground vibrations from instrument noise; the digitizer itself limited one noise measurement.

Circuit schematic around a suspended seismic mass.
The 2023 horizontal sensor schematic. Germenis et al., Figure 1, CC BY 4.0; resized.

Related: detecting marsquakes with InSight.

Add comment

Leave a Reply