Why Do an Ocarina’s Finger Holes Change Its Pitch?

By

·

An ocarina changes notes without becoming longer or shorter. Opening its finger holes changes how air moves through the openings and oscillates with the air enclosed inside.

Red ocarina resting on fabric, with a row of finger holes visible.
An ocarina’s finger holes. Matěj Baťha, CC BY-SA 2.5; resized.

Air acts like a spring

The UNSW acoustics explanation describes a Helmholtz resonator: air near an opening moves back and forth against the compressibility of the enclosed air. The cavity acts rather like a spring, while moving air at the opening supplies inertia.

Opening additional holes provides more routes for that oscillating air. Their combined acoustic inertia decreases, raising the resonance frequency. This is not simply shortening a long pipe. Hole geometry and the enclosed volume matter together, so counting holes alone cannot specify the note.

Underside of a turquoise ocarina showing thumb holes and the sound opening.
A different ocarina’s underside, not the simulated instrument. 0x010C, CC BY-SA 4.0; resized.

A jet sustains the sound

Hiroaki Okada and colleagues’ 2019 numerical study modeled airflow and sound together in an ocarina-shaped cavity. The simulated jet oscillated around the opening, while pressure oscillations developed inside. This feedback matters: the jet and resonator are interacting, not independent sound sources.

The simulation produced a strong main resonance with much weaker higher-frequency peaks. However, it did not test finger-hole combinations; adding tone holes was future work. Its results support the modeled sound-generation mechanism, not a complete fingering chart for every ocarina.

Our bottle-note experiment introduces the simpler single-opening relative of this instrument.

Add comment

Leave a Reply