How Can Cuts Make a Stiff Sheet Easier to Stretch?

By

·

A patterned sheet can extend dramatically when narrow bridges between cuts bend out of its original plane.

Three labeled photographic panels show a cut-paper bottle sleeve, a paper Airvase and an extended paper lattice.
Paper examples, including Torafu Architects’ Airvase. Isobe and Okumura, Figure 1, ©2016 Macmillan Publishers Limited, CC BY 4.0. Unmodified.

Paper changes its motion

In 2016 paper experiments, pulling first produced comparatively stiff, flat deformation. Then the bridges bent and rotated outward, allowing much easier extension. Further pulling eventually concentrated deformation near cut tips and caused fracture. The softness belonged to the cut structure, not newly rubbery paper.

Full research plate showing tensile apparatus, copper-colored cut specimen and labeled specimen geometry schematic.
Test apparatus and specimen schematic. Taniyama and Iwase, Figure 3, ©2019 authors, CC BY 4.0. Unmodified.

The ends matter

In 2019 tests, cut copper-coated polyimide stretched less uniformly near its uncut ends. A fitted model treated those end regions as stiffer springs than the middle. More repeated patterns reduced those end effects. This was not a paper experiment.

Unlike Miura-ori’s creases, these openings reshape the sheet’s response.

Add comment

Leave a Reply