How Can a Raindrop Leave a Crater in Sand?

By

·

A falling drop does more than wet sand: it deforms, pushes grains aside and penetrates the gaps between them.

Small raindrop pits cover rippled sand around sparse beach vegetation.
Raindrop imprints on modern wind-rippled backbeach sand (Sanibel Island, Florida, USA) 1. James St. John; CC BY 2.0. Unmodified; not an experiment.

Two routes out of a crater

A 2014 experiment tracked four repeated impacts on loose, dry sand. Fast water-encased grains escaped from the spreading wet region at shallow angles. More numerous dry grains left the crater’s periphery more slowly and at steeper angles. Wet clumps also broke away. The water and sand therefore did not move as one uniform splash; these were controlled impacts, not a survey of every rainstorm.

Why the residue changes shape

A 2015 study used glass beads as a model sand bed, varying packing and impact speed. Contracting drops pulled mixed-in grains toward the center, leaving rounded or ringlike residues. With greater penetration, contraction weakened and a flatter residue remained. A penetration-timescale model explained this transition. The authors cautioned that their estimated division of impact energy still needed direct, time-resolved force measurements.

Closely spaced rain imprints interrupt sand ripples at Cayo Costa.
Raindrop imprints on modern wind-rippled backbeach sand (Cayo Costa Island, Florida, USA). James St. John; CC BY 2.0. Unmodified; not an experiment.

Compare these pits with flow-built sand ripples.

Add comment

Leave a Reply