A garden sundial can disagree with your phone without being broken. Most ordinary sundials indicate local apparent solar time: time tied to the Sun’s actual position. Your phone follows civil time. Comparing them requires more than checking whether the shadow lands neatly on a number.

First, the instrument has to fit its location
The projecting part that casts a shadow is called the gnomon. On a familiar horizontal garden dial, its sloping time-telling edge should be parallel to Earth’s rotational axis. In the Northern Hemisphere, it points toward the north celestial pole; the corresponding southern design points toward the south celestial pole. The angle above the horizontal depends on latitude.
That geometry matters because a vertical stick’s shadow direction at a given solar time changes with the season. A correctly designed polar-aligned dial avoids that particular problem. NASA’s archived sundial lesson explains the distinction. A decorative dial made for another latitude, or placed at the wrong orientation, can introduce errors before any clock correction enters the picture. Read its instructions rather than rotating it until it agrees with your watch once.
The Sun does not keep perfectly even days
The seasonal correction is called the equation of time. Earth follows a slightly elliptical orbit, so its orbital speed varies. Earth’s axial tilt also changes how the Sun’s apparent motion projects onto the direction used for measuring solar time. These two effects combine; blaming only the elliptical orbit leaves out an important part of the explanation.
According to the U.S. Naval Observatory’s explanation, the accumulated difference between apparent and mean solar time can reach about 16 minutes. This is not a 16-minute change in the length of each day. Small daily differences accumulate into an offset, which then changes through the year. Also check a table’s sign convention: a value defined as apparent minus mean time must be subtracted from the apparent reading to obtain mean time.

Longitude and summer time add separate offsets
A time zone shares a clock setting across places with different longitudes. For an ordinary dial not already corrected for longitude, the adjustment to its zone’s reference meridian is four minutes per degree: add for locations west of that meridian and subtract for locations east. Thus three degrees west contributes twelve minutes, independently of the seasonal correction.
The British Sundial Society’s reading guide treats the date, longitude and daylight-saving adjustments separately. Where a one-hour summer-time shift applies, add that hour after the other corrections. Some dials already incorporate longitude or summer time, so do not blindly apply everything twice. Check the dial’s markings and documentation first.
For a useful comparison, record the date, the shadow reading and the phone time, then list which corrections the dial needs. Compare again on another clear day without moving the instrument. You are testing a measurement system, not merely hunting for a faulty ornament. For another approach to keeping time, explore how pendulum length controls its repeating swing.

Leave a Reply