Why Can a Banana Peel Be So Slippery?

By

·

Banana-peel slipperiness is more than a comedy prop. Crushing the peel can create a lubricating layer, but the measured effect depends on the contact conditions.

Open yellow banana peel lying on a rough paved surface.
Discarded peel, not a laboratory test. Tiia Monto / CC BY-SA 4.0; resized.

Measuring the slide

In Kiyoshi Mabuchi and colleagues’ 2012 experiment, a force sensor measured a shoe sliding over Cavendish peel on linoleum. With the soft inner surface facing down, the average friction coefficient was about 0.07, compared with about 0.41 for the shoe without peel. This ratio compares sideways resistance with downward force; it is not a universal banana constant.

Microscopy suggested that crushing small gel-containing structures released material that spread into a lubricating film. The researchers proposed polysaccharides as its main component; they did not chemically identify every constituent. Dried peel produced substantially greater friction in their setup.

The peel is changing tissue

A separate 2012 anatomical study by Nuankamol Amnuaysin and colleagues followed the peel of Hom Thong bananas, a different cultivar. During ripening, peel thickness and the number of cell layers decreased, while air spaces, cell damage and collapse increased. These changes accompanied declining peel firmness.

Pile of green banana peel strips with pale inner surfaces exposed.
Banana peelings photographed in Kenya; not identified as either study cultivar. Cynthia Doresi Abwova-KE / CC BY-SA 4.0; resized.

That anatomy study did not measure slipperiness. It helps explain why peel should not be treated as an unchanging sheet: its internal structure varies as the fruit ripens. It does not establish a friction value for every ripeness stage.

Do not recreate a slip by stepping on peel. Clear it from walking surfaces. For the broader mechanics, see how friction helps you walk.

Add comment

Leave a Reply