How Does a Stapler Bend Staple Legs Under Paper?

By

·

Pressing a stapler feels like one action, but it performs two different jobs: pushing a staple through the paper and bending its projecting legs underneath. The small metal plate on the base is not just a landing pad. Its shape helps determine the finished fastener.

Blue booklet stapler with its top turned sideways, exposing a patterned metal anvil.
A rotating-top booklet stapler exposes its grooved anvil. Not the patented apparatus discussed below. Photo: Artoria2e5; colour adjustment by Hohum, CC BY 4.0; resized.

The base redirects the legs

A 1982 patent by Tsai C. Soong describes the sequence in a desk-type stapler. A spring-fed magazine positions a staple beneath a blade-like driver. As the driver descends, the legs penetrate the sheets and meet shaped grooves in the anvil below.

Continued downward movement forces the legs to bend. The metal undergoes plastic deformation, meaning that it retains a changed shape rather than simply springing back. The patent explains that bending develops along the leg as the contact and support positions change. It is not necessarily a neat fold occurring only at the tip.

Soong’s proposed improvement adds an opening between the grooves to limit excessive curling and prevent long legs from re-entering thin paper stacks. That is one particular design, not a feature to assume every office stapler contains.

A moving clincher is another solution

A 2005 patent application by Cheng-Tao Tsai contrasts a stationary grooved anvil with an electrically operated arrangement using sliding anvils. In the latter, the legs first project through an opening. Two moving parts then approach and bend them beneath the stack.

The distinction is between guiding the legs against a fixed surface and actively moving a forming surface toward them. Both reshape the fastener, but their moving parts and timing differ. A patent documents a proposed mechanism; it is not an independent test proving that every commercial version will work equally well.

The application also identifies why stack thickness matters: legs that barely emerge may not bend completely, while excessive projecting length can curl back through a thin stack. The geometry has to suit the paper and staple, not merely withstand a harder push.

Three paper samples showing outward-bent staple legs at left, the top bridge in the middle, and inward-bent legs at right.
Outward-bent legs at left, the top at centre, and inward-bent legs at right. Photo: Chris 73 / Wikimedia Commons, CC BY-SA 3.0; resized.

Why some staples point outward

Inward bending is not the only deliberate finish. Swingline’s description of its Standard Stapler specifies an adjustable anvil that rotates to make outward-pointing temporary staples for easier removal. This is a model-specific feature, not a setting present on every stapler.

An outward bend therefore need not mean a malfunction. The intended clinch matters. Later, before feeding those papers into another machine, check whether its instructions permit staples; our paper-shredder guide explains why that compatibility should never be assumed.

Add comment

Leave a Reply