A fountain pen must let ink out while admitting replacement air. Its feed, the structure beneath the nib, manages both flows. A reservoir and a hole alone would not explain its controlled delivery.

Ink leaving changes the pressure
In a 2020 investigation, Alex Nikolov and colleagues monitored pressure and bubble formation in fountain-pen feeds. Their instrumented setup used a cotton wick in place of the nib to draw ink out. As ink left, the pressure in the cartridge’s air pocket fell, resisting further outflow.
Air entered through a narrow channel and formed bubbles at a capillary valve. Bubbles rising into the cartridge relieved some of that pressure deficit, allowing ink delivery to continue. Ink could flow continuously while replacement bubbles arrived intermittently. The researchers emphasized that channel geometry and wetting affect this exchange; different feeds need not behave identically.
The page helps draw the line
The paper is not merely a passive landing surface. Jungchul Kim and colleagues’ 2011 experiments simplified writing to a liquid-filled glass tube moving over a water-attracting array of microscopic pillars. This artificial paper let them isolate how liquid spread from a moving source.
Their model balanced capillary forces pulling liquid into the textured surface against resistance to flow. Line width depended on travel speed, liquid properties and surface geometry. A faster-moving source allowed less sideways spreading, producing a narrower line in their model. Holding the tube still instead produced a spreading blot. The experiment separated fluid spreading from the changing pressure of a person’s handwriting.

Real paper can swell and has uneven pores, limiting model precision. For everyday handling, see the fountain-pen care guide.

Leave a Reply