A tensegrity model can keep rigid pieces apart while cords connect them. The apparent floating is a balance of forces, not an escape from gravity.
Pulling and compression share the work
Kenneth Snelson’s 1965 patent describes rigid members linked by a tension network. Cords pull at their attachment points; the resulting forces place rigid members into compression. The pieces need not form a continuous stack of touching supports. The connected network carries forces between them.
The patent also distinguishes straight members from curved ones. Curved members experience bending as well as compression. “Tensegrity” therefore does not mean every rigid piece in every model carries a perfectly axial force. The visible shape and connections matter.
Tightness changes the response
Prestress means internal forces introduced before an additional working load is applied. In a 2023 computational study, Paulina Obara and Justyna Tomasik analyzed structures assembled from two module types, called Simplex and Quartex. They varied initial prestress and examined deformation and vibration.
Their results did not give one universal stiffness for all tensegrities. Module type, connections and support conditions affected behavior. Some vibration frequencies changed strongly with prestress; others behaved differently. These were model calculations, not load tests of the photographed objects.

The useful question is not whether the pieces look suspended, but how forces pass through their connections. As with bamboo’s structural geometry, material and arrangement must be considered together. A photograph alone cannot certify a model’s safe load.

Leave a Reply