A spiderweb of fine lines in a ceramic glaze is called crazing. It usually develops when the glazed surface and the clay beneath expand and contract at different rates, creating tension that opens hairline cracks in the glaze. Those lines may appear right after firing or much later.
What does glaze crazing actually look like?

The thin interconnected lines in this photographed ceramic surface are cracks in the glaze coating. In some pottery the network is deliberately made as a decorative crackle finish. On a plate or mug designed for everyday use, however, unexpected crazing is a reason to review its condition and the maker’s care advice.
Why a glaze and clay can disagree as they cool
Ceramic dishes are made of a fired clay body covered by a glasslike glaze. Both materials change dimensions when heated and cooled. If the glaze wants to contract more than the body beneath it, the glaze is stretched. When that tension exceeds its strength, it splits into many fine lines. Specialists call this a glaze–body fit problem.
A dish may leave the kiln looking smooth and develop visible crazing weeks or months later. Moisture absorbed by some clay bodies, repeated use, and temperature changes can bring existing stresses to the surface. Heating a dish suddenly does not create every craze pattern, but abrupt temperature extremes can add stress and should be avoided unless the maker specifically rates the ware for them.
Crazing, scratches, and structural cracks are not the same
Crazing looks like a network within the glossy coating. Scratches are often individual scuff marks from utensils and may follow the motion of a fork or knife. A structural crack can continue through the ceramic body and may be visible on both sides, leak liquid, or make the piece feel unstable. A chipped rim is another separate problem because it can expose rough ceramic and sharp edges.
Look over the piece under a lamp and check its underside, especially around handles, bases and rims. Do not deliberately bend or tap fragile pottery to test it. An heirloom or handmade item deserves a potter’s assessment rather than an improvised repair.
Is a crazed mug or dinner plate safe to eat from?
Not every decorative craze pattern means that the ceramic contains a dangerous substance, but fine cracks can be harder to clean and may allow moisture into a porous body. The safest practical choice for unknown, damaged, or visibly stained crazed dinnerware is to retire it from food service and use it for dry decoration instead. Follow the manufacturer’s instructions for a specifically tested crackle-glaze product; ‘non-toxic glaze’ and ‘suitable for daily food contact’ are not identical claims.
Do not try to seal a food-contact crazed surface with an arbitrary craft varnish, nail polish or household glue. Such coatings may not be food-safe or heat-resistant. If a mug leaks, chips, or has a crack through the body, stop using it for hot beverages.
Can you repair the spiderweb lines at home?
Cleaning may lighten stains trapped in surface cracks, but it does not reverse a glaze–clay thermal mismatch. Reheating a finished dish in a home oven will not refire its glaze. For handmade work, a professional potter can consider whether the original glaze formulation or firing needs adjustment for future pieces. For a favorite decorative cup, prevent new damage by avoiding thermal shock and storing it where it cannot be knocked over.
Frequently asked questions
Can crazing happen years after purchase? Yes. Delayed crazing can follow changes in internal stress and moisture absorption.
Does the web of lines mean the plate is about to shatter? Not necessarily, but structural fractures, chips, leaks and increasing damage deserve particular caution.
Should I microwave a crazed mug? Do not assume it is suitable. Check the maker’s guidance; discontinue heating a damaged or unknown piece.
Are intentional crackle glazes different? They intentionally show a similar network, but food-contact suitability depends on the complete ware and its testing, not the decorative effect.
Sources and further reading: Glazy’s guide to common glaze defects; Orton kiln firing guidance on crazing.

Leave a Reply